Corrugated Box Size Calculator & DXF Template Generator

Free board size calculator for corrugated boxes. Select a FEFCO box style, enter the carton size in mm or inches, adjust any numbered panel, and download a 1:1 DXF box template.

How to use the box size calculator

  1. Select the box style. The numbered layout and the panel list change with the style.
  2. Choose mm or inch, then enter the carton size. Some styles need extra values, such as a glue flap.
  3. Board thickness is optional. Leave it empty for a general calculation that applies to all box making machines, including other brands. Enter a thickness, including 0, to add the default offsets for that style, and change them to suit your machine.
  4. Read the board length and board width in the result box.
  5. To change a panel, enter a new offset next to its number. Each panel shows base + offset = final.
  6. Offset creasing is optional. Turn it on to move the crease line of alternate panels outwards. The crease offset is set from the board thickness and can be changed.
  7. Select Download DXF to save the box template for your own design work.

Download a free DXF box template

Use this calculator as a box template generator. After you set the sizes, select Download DXF to save the dieline of the selected style. You do not need an account.

  • The drawing is 1:1 in the unit you selected, millimetres or inches, and uses your final panel sizes. The file name shows the style and the unit.
  • Cut lines are on the CUT layer and fold lines are on the CREASE layer.
  • All lines are solid line segments, and the slots are 7 mm wide.
  • With offset creasing on, the offset crease lines are drawn at their true position and the file name ends in _offset.

Use the file as a starting point for artwork, packaging design or sample work in software that reads DXF.

How the board size is calculated

Every numbered panel is base size + offset. The base size comes from the carton length, width and height, and the panel list on the page shows which is which. If thickness is empty, every offset is 0. If you enter a thickness, the default offsets for the selected style are added, and you can change each one.

Board length is the sum of the panels along the board, plus the glue flap where the style has one. Board width is the sum of the panels across the board. Each board size is rounded to a whole millimetre, and an exact .5 rounds to the nearest even number. In inch mode the rounded millimetre value is shown in inches with two decimals.

Frequently asked questions

Which box styles are included?

FEFCO 0201 and FEFCO 0300 are available now. More FEFCO styles are being added.

Does the calculator work for other machines?

Yes. Leave board thickness empty for a general calculation that applies to all box making machines, including other brands. If you enter a thickness, default offsets are added, and you can change them to suit your machine.

Can I use inches?

Yes. Select inch above the calculator. Sizes are calculated in millimetres and shown in inches with two decimals, the same way the AOPACK machine screen works. The board size is rounded to a whole millimetre first, so a value such as 24.02 in can appear.

Do AOPACK machines work in inches?

Yes. Every AOPACK box making machine can switch between millimetres and inches on the touchscreen.

What happens to my offsets when I change the thickness?

All offsets return to the default values for the new thickness. If you clear the thickness, every offset returns to 0. Changing the carton size keeps your offsets.

What is offset creasing?

Offset creasing moves the crease line of alternate panels outwards by a small amount, so the outer flaps fold over the inner flaps without bulging. The board width grows by twice the crease offset. Turn it on in the calculator and change the crease offset if your machine or board needs a different value.

Why do some panels have a different default offset?

Default offsets depend on the box style and the position of the panel. The offset column shows them, and you can change any of them.

Is the DXF box template free?

Yes. You can download it without an account.

Can I import the DXF file into a box making machine?

No. The file is for your own design work and is not made for importing into a machine.

Which machine options are not included?

The calculator uses the standard shape of each style. It does not apply half box, inside or outside size, high and low crease, or multi-out settings.

Can I use the result for production?

Use it as a reference. Actual settings depend on the board, the job and the machine calibration, and the calculator does not check whether a size can be produced on a specific machine.

How can I produce these boxes without cutting dies?

An automatic box making machine from AOPACK makes custom corrugated boxes on demand: enter the box style and size on the touchscreen and the machine slots, creases and cuts the blank, with no die and a changeover of a few seconds. See the box making machine models or contact us for a quote.